Been scanning some old slides recently. New Zealand, sometime early 80's. The car I learnt to drive in... * Wobbly suspension * Elastic steering * Spongy clutch * Gear shift only vaguely connected to the cogs it was stirring A near new Marina!
I like both — totally different applications — and hadn’t noticed the similarity until Windows desktop auto-arrange put these two icons next to each other…
Revit
If you’re debating whether to migrate a project to 2016 these posts from ‘The Factory’ may help the decision. A look at how Revit 2016 uses multicore processing to improve model navigation. Inside the Factory: Revit 2016 | Project Performance - Part 1 Often the Revit product team is asked how
Details of next Wednesdays RUGWELL March meeting: First presentation: Case Study - The Adelaide Convention Centre West Building by John Hainsworth - Aurecon Suitable for all levels of expertise, Full Revit & Revit LT This case study will showcase how the Design Intent BIM and the Supply BIM contributed to the planning,
Kodari devastated
My notes & photos from TEDx Auckland 2015. I only took the phone (for both notes & photos) and was sitting right at the back of the hall so my shots are a bit ‘distant’. * The italics are the speaker profiles sent out by TEDx Auckland * The bullet points my
I think I’ll restart and hope for a faster connection to get these patches…
It is a multi-step (and quite expensive) process, but worked for me: 1. Get a heat pump installed (nowhere near the PC, not even using the same power circuit) 2. Arrive home and start computer, discover no response from screen 1. No power indication 2. No backlight 3. No
JPS: Jittery Positioning System?
Nice that 100% proceeds go to Nepal via the Oxfam Earthquake Relief Fund. Sent from my Lumia 1520 Windows Phone From: Team at the NZ International Comedy Festival Subject: Comedy for Nepal and shows on this weekend The New Zealand Comedy Trust and Q Theatre are putting on Comedy for
If you have an AutoCAD question check out the upcoming answer day (May 7th US Pacific). Post your question and get an answer direct from AutoCAD Platform team members. Their post below has all the details: From http://forums.autodesk.com/t5/autocad-answer-day/ We’ll be kicking off
Looking forward to an inspiring day at TEDx Auckland. Not often, ever?, I go to a church* all day! * Victory 'Conference' Centre